Setting Squelch; S/Rf Meter; External Speaker - Cobra 29 LX Owner's Manual

Operation

Setting Squelch

Continued
Gate set to Desired
Squelch Setting (DSS)
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS To achieve the Desired Squelch Setting (DSS),
3
turn the Squelch control counterclockwise
until you hear noise. Now turn the control
NOISE
clockwise just until the noise stops. This is the
DSS setting.

S/RF Meter

S/RF Meter
This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
The S/RF-SWR-CAL button must be in the
1
S/RF mode.
30

External Speaker

The external speaker jack is used for remote
receiver monitoring.
Connect an external speaker to the external
1
speaker jack on the rear panel.
Operation
External Speaker
Note
The external speaker should
have 8-ohm impedance
and be rated to handle at
least 4.0 watts. When the
external speaker is plugged
in, the internal speaker is
automatically disconnected.
To order external speakers and
other accessories, please go to
www.cobra.com
Note
Cobra external speakers are
rated at 10 watts.
31