Setting Squelch - Cobra HH 50 WX ST Operating Instructions Manual

Operation
Turning On
Turning On
Rotate ON - OFF Volume Control clockwise.
Note
Make sure the antenna is
installed on the radio.
Note
When you turn on the
HH 50 WX ST , a series of tones
will be heard and the icons will
briefly appear on the LCD
display.
LCD lights on for 5 seconds,
then turns off.

Setting Squelch

Setting Squelch
Squelch is the "control gate" for incoming signals.
Gate closed
Turn the volume up
1
louder than normal.
4
SQUELCH VOLUME
OFF
SQUELCH VOLUME
SQUELCH VOLUME
OFF
OFF
Fully clockwise
2
closes the "gate",
allowing no
incoming signals.
SQUELCH VOLUME
OFF
Fully counterclockwise opens the
3
"gate" and all signals enter.
SQUELCH VOLUME
OFF
SQUELCH VOLUME
OFF
To achieve the Desired Squelch Setting (DSS),
4
turn the Squelch control counterclockwise until
you hear noise. Now turn the control clock-
wise just until the noise stops. This is the DSS
setting.
Operation
Gate open
SQUELCH VOLUME
OFF
Gate set to Desired
Squelch Setting (DSS)
SQUELCH VOLUME
OFF
5