Technical Specifications - Gallagher T15 Custom Installation Notes

7 Technical specifications
Routine maintenance:
Cleaning:
Voltage:
:
3
Current
Temperature range:
Humidity:
Environmental protection:
Impact rating:
Unit dimensions:
Maximum number of readers
on one HBUS cable:
The reader is idle.
1
Maximum reader current during credential read.
2
The current values stated above have been reported using the default configuration for a reader
3
in Command Centre. Changing the configuration may vary the current value. Reader currents
verified by UL are provided in the document "3E2793 Gallagher Command Centre UL Configuration
Requirements".
Gallagher T Series readers are UL temperature tested and certified for operation in 0
4
and -35 C - +66
o
Gallagher T Series readers are UL humidity tested and certified to 85% and have been independently
5
verified to 95%.
Environmental protection and impact ratings are independently verified.
6
3E4237 Gallagher T15 Reader | Edition 11 | February 2022
Copyright © Gallagher Group Limited
Not applicable for this reader
This reader should only be cleaned with a clean, lint free, damp cloth
13.6 Vdc
Idle
50 mA
-35 °C to +70 °C
Note: Direct sunlight may increase the internal reader temperature
above the ambient temperature level
0 - 95% non-condensing
6
IP68
IK07
6
Height 139 mm (5.47 inches)
Width 44 mm (1.73 inches)
Depth 23 mm (0.9 inches)
20
C (outdoor).
o
MIFARE Reader
Maximum
1 2
77 mA
4
5
Multi Tech Reader
Maximum
1
Idle
81 mA 136 mA
C - 49 C (indoor)
o o
2
Page 11