Setting The Navigation Data Window - Furuno GP-3500F Operator's Manual

9.6.2

Setting the navigation data window

The navigation data window appears at the top of the PLOTTER (or PILOT) NAV
INFO 1 display and PLOTTER (or PILOT) NV INFO 2 display. You may select
the data to display and where to display it as follows:
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [4] key to show the DISPLAY MODES & NAV DATA WINDOW
SETUP menu.
4. Press the [2] key to show the NAVIGATION DATA WINDOW SETUP menu.
5. Roll the trackball in left-right direction to select a display title.
NAV INFO1:
NAV INFO2:
GOTO INFO1:
GOTO INFO2:
6. Rotate the [ENTER] knob to select a display pattern, and then press the
[ENTER] knob.
0-4-2. NAVIGATION DATA WINDOW SETUP
NAV INFO 1 NAV INFO 2 GOTO INFO1 GOTO INFO2
TURN KNOB TO SELECT NAV DATA AND PRESS KNOB TO ENTER.
Navigation data setup menu
Window shown on NAV INFO1 display.
Window shown on NAV INFO2 display.
Window shown when a destination is set at NAV INFO1
display.
Window shown when a destination is set at NAV INFO2
display.
9. CUSTOMIZING YOUR UNIT
9-29