Navigation Data Display - Furuno GP-1850WD Operator's Manual

2. PLOTTER DISPLAYS
2.7

Navigation Data Display

The navigation data display provide generic
navigation data and DGPS/GPS information.
Press the [PLOT] several times to show the
navigation data display.
Position
Date
DATE: JUN 30 2002 TIME 23:59:59
POSITION
34 56.789' N
135 56.789' E
SPD RNG
12.5
kt
CSE BRG
359.9
DATUM: WGS-84
TMP 65.8 F DEP
DGPS 3D
Temperature, depth
Geodetic chart datum
Course
Speed
Navigation data display
The navigation data display shows your
position by L/L or TD (Loran-C, Decca). To
change position format, press the
appropriate LAT/LON or TD soft key.
Enlarging an indication
An indication on the screen may be enlarged
as follows:
1. Use the cursor pad to select the
indication which you wish to enlarge.
Selected indication is circumscribed with
a red cursor.
2. Press the ZOOM soft key.
To return to the normal nav data display,
press the RETURN soft key.
2-6
Range to waypoint
LAT/LON
TRIP:123nm
LAT
LON
TD
123.25
nm ZOOM
299.9
SAT
INFO
BEACON
INFO
20.8ft
Bearing to waypoint
GPS satellite monitor display
The GPS satellite monitor display shows
information about GPS satellites.
Press the SAT INFO soft key. Your display
should look something like the following
illustration.
Date
DATE: JUN 30 2002
N
08
21
05
12
07
WAAS
W
20
satellite* W
06
11
03
S
ALT 5 m
DGPS 3D
GPS fix Altitude
state
Estimated position in the sky, and
satellite number in reverse video is
used for positioning.
*Only when WAAS fix mode is used.
GPS satellite monitor display
To return to the normal navigation data
display, press the RETURN soft key.
Receive signal level
Bars show satellite
signal level.
SAT
TIME 23:59:59
INFO
SNR
SAT
No. 30 40 50
21
07
06
11
E
03
05
12
08
20
123
DOP 2.0
RETURN
DOP value
For WAAS
satellite*