Setting Data 4 To Data Output - Furuno GP-90 Installation Manual

Setting DATA 4 to Data Output

1) Press [MENU], [9] and [5]. The DATA 4 I/O SETUP menu appears.
2) Press or to select DATA4. Level.
3) Press or to select level of external equipment; RS232C or RS422.
4) Press the [ENT] key.
5) Press or to select Out.
6) Press to select to Next Page. The DATA 4 I/O SETUP <out> menu appears.
7) Follow "DATA 1 output setting" from step 2.
DATA 4 I/O SETUP
DATA 4. Level RS232C
Data Out
To Next Page
: Select
ENT : Enter MENU : Escape
Appears only when external
DGPS receiver is used.
Figure 5-5 DATA 4 I/O SETUP menu
DATA 4 I/O SETUP
To Previous Page
Data Fmt. V1.5
Talker ID GP
Output Data (00-90 sec)
1. AAM:00 APA:00
2. BWR:00 BWW:00 GGA:00 GLL:01
3. RMB:01 RMC:00 VTG:01
4. VDR:00 WPL:00
5. GNS:00 GBS:01 Rnn:00
ENT : Enter
Figure 5-6 DATA 4 I/O SETUP <out> menu
1/2
RS422
Com. DGPS
<Out> 2/2
V2.0 IEC
LC DE
100%
APB:04 BOD:00
WCV:00
XTE:00 ZDA:01
RTE:00
MENU : Escape
5. INITIAL SETTINGS
15