Specifications - Furuno GP-1640 Operator's Manual

1 GENERAL
1.1 Display
1.2 Projection
1.3 Usable Area
1.4 Display Mode
1.5 Alarms
2 GPS RECEIVER
2.1 Receiving Channels
GPS
WAAS
2.2 Rx Frequency
2.3 Rx Code
2.4 Position Fixing System
2.5 Position Accuracy
GPS
DGPS
WAAS
2.6 Tracking Velocity
2.7 Position-fixing Time
2.8 Position Update Interval 1 s
3 DISPLAY UNIT
3.1 Display Mode
3.2 Effective Area
3.3 Display Pixels
4 PLOTTER FUNCTIONS
4.1 Effective Projection Area 0.125 nm to 2,048 nm (at equatorial area)
4.2 Track Display
4.3 Memory Capacity
4.4 Storage Capacity
4.5 MOB
SPECIFICATIONS OF GPS PLOTTER
GP-1640
5.7-inch monochrome LCD
Mercator
85° latitude or below
Plotter, Video pilot, Highway display, Waypoint display
Arrival and Anchor watch, Cross track error and proximity alarms,
Ship's speed in and out alarms
12 channels parallel, 12 satellites tracking
1 channel
1575.42 MHz
C/A code, WAAS
All in view, 8-state Kalman filter
10 m (95% of the time, HDOP 4)
5 m (95% of the time, external data required)
3 m (95% of the time)
999 kt
Warm start: 12 s approx., Cold start: 90 s approx.
monochrome, 5 levels (include base color)
115 (W) x 84.2 (H) mm
320 (W) x 240 (H) dots
Plot interval: by time (1 s to 99 m 59 s)
or by distance (0.01 nm to 99.99 nm)
Track/Mark: 5000 points, waypoint: 800 point
Simple route: 200 routes with 35 waypoints each
1 point
SP - 1
E4423S01A