Grinder: Adjusting The Grinding Fineness; Preparing Drinks - Krups Evidence Eco-Design EA897 Manual

HOW TO INSTALL THE CLARIS AQUA FILTER SYSTEM CARTRIDGE
• Your machine should be plugged in and switched on
• The cartridge is placed in the water tank
• Place the cartridge with the numbered ring at the top
• Use the black screwing accessory supplied with the cartridge to properly position and screw in the
cartridge
• On your illuminated screen
menu. Place a container under the nozzles.
• The button flashes and the coffee rinsing image
• Press to initiate use of the filter.
• The lights under the recipes will fade in and out during installation.
• Installation is complete when the light is steady again.

GRINDER: ADJUSTING THE GRINDING FINENESS

You can adjust the strength of your coffee by adjusting the grinding fineness of the coffee beans.
Varying the grinding fineness makes it possible to adapt to different types of bean:
- A highly roasted and oily bean will require a coarse grinding,
- A more lightly roasted bean will be drier and will require a fine grinding.
Note: the finer the grinding, the more powerful the aroma.
Roasting:
Light Medium
(Blonde) (Amber)
HOW TO ADJUST THE GRINDING FINENESS
Turn the setting button located in the coffee bean container (J) to suit your bean type and the power of aroma desired.
This adjustment must be performed during grinding and notch by notch. After 3 preparations you will notice a distinct
difference in taste.
Caution: We do not recommend the use of oily and caramelised beans as these are difficult for the grinder to process.
These can damage the machine and lead to poor sensor performance.
66
, press for 3 seconds. A beep will confirm entry into the Installing the filter
is lit up.
Strong Intense Very
(Light (French) intense
French) (Dark
French)

PREPARING DRINKS

DRINKS AVAILABLE FROM THIS MACHINE AND POSSIBLE SETTINGS:
Approximate
Drinks
size
M = 20 ml
Ristretto
L = 25 ml
Short espresso with body
XL = 35 ml
M = 40 ml
Espresso
L = 55 ml
Full-bodied espresso with pronounced aromas, covered
with a slightly bitter caramel-coloured crema
XL = 70 ml
M = 80 ml
Long coffee
L = 120 ml
Higher in caffeine but lighter on the palate. Very popular
in the morning XL = 180 ml
M = 90 ml
Americano
L = 120 ml
Double long espresso combined with hot water
XL = 150 ml
M = 120 ml
Cappuccino
L = 180 ml
A balance between milk, foam and coffee
XL = 240 ml
M = 200 ml
Caffe Latte
L = 280 ml
Milk foam with a subtle coffee flavour
XL = 350 ml
M = 190 ml
Latte Macchiato
L = 250 ml
A large helping of milk, a gourmet Espresso with milk foam
XL = 340 ml
M = 100 ml
HOT WATER L = 200 ml
XL = 300 ml
Hints & Tips
Every time you choose a drink, the machine will use the most recent settings.
For each recipe, you can increase the volume of your drink during the recipe.
FOR YOUR INFORMATION, YOUR MACHINE WILL AUTOMATICALLY PERFORM THE FOLLOWING
STEPS TO PREPARE YOUR DRINK:
For coffee recipes For milky recipes not including Caffe Latte: For Caffe Latte:
1. Grinding the coffee beans 1. Preheating stage
2. Compaction of the grinding 2. Milk frothing
3. Pre-infusion (some drops may 3. Grinding the coffee beans
fall into your cup at this stage) 4. Compaction of the grinding
4. Percolation 5. Pre-infusion (some drops may fall into
your cup at this stage)
6. Percolation
AMERICANO
For this recipe, your machine will make two espressos one after the other. There will therefore be two grindings followed
by the addition of hot water.
HOW TO ADJUST THE HEIGHT OF THE COFFEE NOZZLES
For all of the drinks proposed you can lower and reassemble the coffee nozzles according to the size of your cup(s).
Recommended Coffee
Extra Shot
X2
volume strength
L   
M   
L
  
L
  
L   
L   
L   
L

1. Grinding the coffee beans
2. Compaction of the grinding
3. Pre-infusion (some drops may fall
into your cup at this stage)
4. Percolation
5. Preheating stage
6. Milk frothing
67