Important Safety Instructions; Children's Safety; Appropriate Installation Location - Beko WMB 61231CSPTM User Manual

Table of Contents

Advertisement

Available languages

Available languages

1 Important safety instructions

This section contains safety instructions that will help
protect from risk of personal injury or property damage.
Failure to follow these instructions shall void any warranty.
General safety
8 years and older children and people with reduced
physical, sensory, and mental abilities as well as
unskilled or inexperienced persons can use this
appliance provided that they are supervised and
instructed on safe use of the appliance as well as
to the related dangers. Children should not play
or tamper with the appliance. Cleaning and user
maintenance should never be performed by children
unless supervised by a responsible adult.
Never place the product on a carpet-covered floor;
otherwise, lack of airflow beneath the machine will
cause electrical parts to overheat. This will cause
problems with your product.
Do not operate the product if the power cable / plug
is damaged. Call the Authorized Service Agent.
Have a qualified electrician connect a 16-Ampere
fuse to the installation location of the product.
If the product has a failure, it should not be operated
unless it is repaired by the Authorized Service Agent.
There is the risk of electric shock!
This product is designed to resume operating in the
event of powering on after a power interruption. If you
wish to cancel the programme, see "Cancelling the
programme" section.
Connect the product to a grounded outlet protected
by a fuse complying with the values in the "Technical
specifications" table. Do not neglect to have the
grounding installation made by a qualified electrician.
Our company shall not be liable for any damages that
will arise when the product is used without grounding
in accordance with the local regulations.
The water supply and draining hoses must be
securely fastened and remain undamaged. Otherwise,
there is the risk of water leakage.
Never open the loading door or remove the filter while
there is still water in the drum. Otherwise, risk of
flooding and injury from hot water will occur.
Do not force open the locked loading door. The
loading door will be ready to open just a few minutes
after the washing cycle comes to an end. In case of
forcing the loading door to open, the door and the
lock mechanism may get damaged.
Unplug the product when not in use.
Never wash the product by spreading or pouring
water onto it! There is the risk of electric shock!
Never touch the plug with wet hands! Never unplug
by pulling on the cable, always pull out by grabbing
the plug.
Use detergents, softeners and supplements suitable
for automatic washing machines only.
Follow the instructions on the textile tags and on the
detergent package.
The product must be unplugged during installation,
maintenance, cleaning and repairing procedures.
Always have the installation and repairing procedures
carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages
that may arise from procedures carried out by
unauthorized persons.
Intended use
This product has been designed for domestic use. It
is not suitable for commercial use and it must not be
used out of its intended use.
The product must only be used for washing and
rinsing of laundry that are marked accordingly.
The manufacturer waives any responsibility arisen
from incorrect usage or transportation.

Children's safety

Electrical products are dangerous for the children.
Keep children away from the product when it is in
use. Do not let them to tamper with the product. Use
child lock to prevent children from intervening with
the product.
Do not forget to close the loading door when leaving
the room where the product is located.
Store all detergents and additives in a safe place
away from the reach of the children.
2 Installation
Refer to the nearest Authorised Service Agent for
installation of the product. To make the product ready
for use, review the information in the user manual and
make sure that the electricity, tap water supply and
water drainage systems are appropriate before calling
the Authorized Service Agent. If they are not, call a
qualified technician and plumber to have any necessary
arrangements carried out.
C
Preparation of the location and electrical, tap
water and waste water installations at the place of
installation is under customer's responsibility.
B
Installation and electrical connections of the product
must be carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages
that may arise from procedures carried out by
unauthorized persons.
A
Prior to installation, visually check if the product
has any defects on it. If so, do not have it installed.
Damaged products cause risks for your safety.
C
Make sure that the water inlet and discharge hoses
as well as the power cable are not folded, pinched or
crushed while pushing the product into its place after
installation or cleaning procedures.

Appropriate installation location

Place the machine on a rigid floor. Do not place it on
a long pile rug or similar surfaces.
Total weight of the washing machine and the dryer
-with full load- when they are placed on top of each
other reaches to approx. 180 kilograms. Place the
product on a solid and flat floor that has sufficient
load carrying capacity!
Do not place the product on the power cable.
Do not install the product at places where
temperature may fall below 0ºC.
20
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wmb 61031csptm

Table of Contents