Suggested Pb free solder
There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu
(tin, silver, copper) solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can
also beused.
3. Important safety tests
Measuring H.V.
The anode caps are cemented to the CRTs. To gain access for high voltage measurement,
remove the red CRT's anode lead from the flyback transformer distributor. Grasp the anode lead
protective cap at its bottom and squeeze it against thelocking cap body inside, rotate 1/4 turn
counter clockwise and pull the anode lead sleeve out of the FBT distributor. Connect a high
voltage positive lead from your H.V. meter to the FBT distributor, and the common negative lead
to cold ground
FBT leads removal
5