Panasonic PT-47X54J Service Manual page 232

pattern disappear).
10. Press "TV/VIDEO" key to enter "DATA_POS" mode
11. Adjust by pressing VOL right - left so that peak of curve is the
same position as center of cursor.
12. Press "TV/VIDEO" key on remote to enter "OSD_POS" mode.
13. Press "5" key on remote so that monoscope pattern appears
(superimpose mode)
14. Move cursor by pressing VOL right - left and CH up - down so
that cursor center overlap monoscope pattern center
15. Press "0" key to go back to "Coarse adjustment" mode.
16. Press "TV/VIDEO" key to cycle through "Coarse adjustment"
options
17. To change to "Fine Adjustment Mode" options ("FINE" DAC),
press "TV/VIDEO" key on remote for at least 3 seconds, to go back
to "Coarse
Adjustment Mode" options press "TV/VIDEO" on remote again for
3 seconds.
18. In "Fine Adjustment Mode" options, press "MUTE" key on remote
to switch between "cursor" mode and "data" mode.
- Cursor mode: Allows cursor movement by pressing VOL right
- left and CH up - down.
- Data mode: Allows making adjustment by pressing VOL right -
left and CH up - down.
Symmetrical shape
"COARSE" modes cycle
62