Panasonic PT-47X54J Service Manual page 16

mode section).
2. Select "AREA" DAC and then press ACTION button on remote to
enter. Press VOL right/left to select one of the following options
then press ACTION:
- Select ALL to copy all main EEPROM data
- Select ADJ to copy only adjustment data.
- Select FIX to copy only fix data
3. To copy data from main EEPROM to jig, select "IN
press ACTION button on remote. The register background will
momentarily become yellow indicating that copy is in progress.
4. To copy data from jig to main EEPROM, select "EX
press ACTION button on remote. The register background will
momentarily become yellow indicating that copy is in progress.
Procedure to copy convergence:
1. Enter to service mode and display service menu
2. Select "FINE" DAC and press ACTION on remote.
3. Press "8" on remote.
4. Select from and then press ACTION on remote:
- INT to copy data from internal EEPROM to jig
- EXT to copy from jig to internal EEPROM.
5. Select an option from the menu with CH keys and confirm with
ACTION:
- DEFAULT:default factory preset
- CURRENT:to copy the current (receiver data or jig data)
convergence adjustments to memory.
- NOT USE: to back up data.
- ALL: to copy all data.
NOTE:
The stated as default factory preset contain the factory DATA; Use this option when data
was lost or when adjustment is lost completely.
16
EX" DAC and
IN" DAC and