10.6. Convergence alignment template
The convergence alignment template is a grid approximately the size of the viewing screen used
to ensure the proper size and shape of the alignment rasters. It is 6 blocks across by 6 blocks
high. Apply a convergence alignment template to the viewingscreen of the PTV. Make sure the
center lines are properly aligned. If a template is not available, one can be created by following
the instructions below.Create a convergence alignment template by drawing a pattern, as in the
figure, in the actualdimensions on transparent film or tracing paper. Start with the Horizontal and
Vertical Center Axis and work outwards until the pattern is complete. Pay attention to the actual
dimensions of the pattern.
Template dimensions:
- 47": 1037mm horizontal x 83.43mm vertical.
- 53": 1173.3mm horizontal x 660mm vertical.
Single grid dimension:
SCREEN
HORIZONTAL VERTICAL
SIZE
47"
167.83mm
53"
189.22 mm
NOTE:
A convergence alignment template, part number TXFQD01JSER is available through Matsushita/
Panasonic Services
83.43mm
94.29 mm
Convergence template.
33