blocks high. Apply a convergence alignment template to the
viewing screen of the PTV. Make sure the center lines are
properly aligned. If a template is not available, one can be
created
by
following
the
convergence alignment template by drawing a pattern, as in the
figure, in the actual dimensions on transparent film or tracing
paper. Start with the Horizontal and Vertical Center Axis and
work outwards until the pattern is complete. Pay attention to the
actual dimensions of the pattern.
Template dimensions:
• • • • 47": 1037mm horizontal x 83.43mm vertical.
• • • • 53": 1173.3mm horizontal x 660mm vertical.
Single grid dimension:
SCREEN SIZE
HORIZONTAL
47"
167.83mm
53"
189.22 mm
NOTE:
A
convergence
alignment
TXFQD01JSER is available through Matsushita/Panasonic
Services
Convergence template.
instructions
below.Create
VERTICAL
83.43mm
94.29 mm
template,
part
number
a
20