Additional Views; Valve In Waiting Mode - Galcon 6100 Series Installation And Operating Instructions Manual

1. Press Enter
2. Wait until no digit is blinking.
3. Press and
show 00 +%.
4. Press , 00 will flash. By means of
and will add or subtract the percentage
as required (in steps of 10%). If you added or
subtracted, % will show a fixed symbol of +%
or -% on the main screen.
Note: It is not possible to change a percentage to a single valve.

6. Additional Views

6.1 Valve in Waiting Mode

This section is not intended for DC-1 and DC-2 models. When two valves are
On and a third valve is scheduled to open, this valve will switch to Waiting.
The flicker will appear above the number of
the valve that is in Waiting mode. As soon
as one of the valves closes, the waiting
valve will open. When manually operating
a computerized waiting valve - the letter W
(Wait) will appear on the display, and the valve
will open as soon as another valve closes.
until a clock is displayed.
together. The display will
21