Galcon 6100 Series Installation And Operating Instructions Manual page 15

1. Press Enter until
2. Click Set . A flashing arrow will appear at the bottom of the display.
3. Press or
program.
4. Press ENTER until the icon
5. Click Set . The hour digit will flash. Press
number 2 will be displayed.
Click Set . The minute digit will flash. Press
number 30 will appear in units of minutes.
6. Press Enter
7. Click Set . A flashing arrow will appear at the top of the display,
below Monday. Press Set
Tuesday, and then click on the plus symbol
Tuesday will stop flashing and move to the right, to Wednesday. Press
Set twice to move the arrow to Friday, and then click Plus
8. Press Enter
. The hours digit will flash.
9. Set the start time to 08:00 by clicking on the plus
sign. Repeat this step to set the second start time (2) STARTII to 13:00,
and the third start time (3) STARTIII to 19:00.
10. Press Enter
Press and the hours digit will flash.
11. Press the plus
valve opening is now canceled.
appears.
to move the arrow to the valve number you want to
appears.
. The days icon will be displayed.
until the flashing arrow appears below
; the start time STARTI will be displayed. Click Set
for the fourth start time (4) START IV will be displayed.
or minus sign until OFF is displayed. The fourth
or until the
or until the
. The arrow below
or minus
.
15