Replacing The License Plate Light Bulb; Front Wheel - Yamaha 135LC 2022 Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screw.
1. Screw
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
Periodic maintenance and adjustment
EAUM3510
1
1. License plate light bulb
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screw.
7-33

Front wheel

1
To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Remove the axle nut.
1. Axle nut
3. Pull the wheel axle out, and then
remove the wheel. NOTICE: Do
not apply the brake after the
EAU24361
EAU60841
EWA10822
7
1