Periodic maintenance and adjustment
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panels.
7
Replacing a rear turn signal
light bulb
1. Remove the turn signal light unit
by removing the screw.
1. Screw
2. Remove the socket (together with
the turn signal light bulb) by turn-
ing it counterclockwise.
3. Remove the burnt-out bulb by
pulling it outward.
7-32
EAUV0960
1
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]
1