Table of Contents
Advertisement
ADM Flow Meter
Switching the ADM flow meter On and Off
Agilent CrossLab CS ADM Flow Meter Operation Manual
Switching the ADM flow meter On
and Off
With the flow meter powered off, briefly press and release
Power/Mode button to turn the unit on. The screen will flash the
words ADM Flow Meter for approximately three seconds, then
begin operating.
Figure 2. The initial screen display for the Agilent ADM flow meter.
With the unit powered on, press and hold the Power/Mode
button for three seconds to power down the unit.
Figure 3. The shutdown screen for the Agilent ADM flow meter.
7
Advertisement
Table of Contents
