Printer (Nkg-901) - JRC JSS-2150 Instruction Manual

10.5 Printer (NKG-901)

The thermal head of the NKG-91 printer may be very hot after printing. Do
not touch the thermal head of the printer.
is cool before replacing the paper or cleaning the thermal head.
The paper used in this printer is heat sensitive. Take the following precautions
when using this paper.
・ Store the paper away from heat, humidity, or heat sources.
・
Do not rub the paper with any hard objects.
・
Do not place the paper near organic solvents.
・
Do not allow the paper to come in contact with polyvinyl chloride film,
erasers, or adhesive tape for long periods of time.
・
Keep the paper away from freshly copied diazo type or wet process copy
paper.
1
2
4
■
Loading the printer paper
1 1 . .
1 .
Raise up the opening lever until it sounds,
and pull it.
The paper cover will open.
2 2 . .
2 .
Insert the paper as shown in the diagram at
right.
Position the paper such that the leading edge
extends outside the printer, and press center
of top of the paper cover to close it until it
sounds.
Note
The printer will be turned on and off simultaneously with the equipment.
to push out the thermal paper by pushing the feed button while the printer is
on.
CAUTION
NKG‐901
PRINTER
■
Make sure that the thermal head
1. Paper cutter
2. Opening lever
3. Feed button
4. Paper cover
3
Options Operation
It is possible
10-7