Setting The Attenuation (Att); Setting The Clarifier - JRC JSS-2150 Instruction Manual

4.3.5

Setting the attenuation (ATT)

■ ■
Procedure
1 1 . .
1 .
Press the
MENU
hierarchical menus, after 5.4 Receiver
appears, move the cursor to 3.
Attenuation.
2 2 . .
2 .
Press ENT to move the cursor to the right,
then use the jog dial to select 6dB, 12dB,
18dB, or OFF.
After selecting and pressing ENT, the
settings are complete.
Note The same settings can be done by pressing and holding the
4
key at the same time.
ATT
4.3.6

Setting the clarifier

■ ■
Procedure
1 1 . .
1 .
Press the
MENU
hierarchical menus, after 5.4 Receiver
appears, move the cursor to 4. Clarifier.
2 2 . .
2 .
Press ENT to move the cursor to the right, then
use the jog dial or numeric keypad to select a
value in the range of -200 to +200 Hz.
After inputting and pressing ENT, the settings
are complete.
- When using the numeric keypad,
Note
input "+" with the
with the
- Pressing and holding the
and the
opens a popup screen. The same
settings can be done here.
- This function is invalid in the DSC
mode or the telex mode.
key, and through
key, and through
1 key and "-"
CLAR
2 key.
SC AN
1 key at the same time
CLAR
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction
3.Attenuation
4.Clarifier
5.Squelch
6.CW bandwidth
7.Scan
0.Back
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction
3.Attenuation
4.Clarifier
5.Squelch
6.CW bandwidth
7.Scan
0.Back
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction
3.Attenuation
4.Clarifier
5.Squelch
6.CW bandwidth
7.Scan
0.Back
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction
3.Attenuation
4.Clarifier
5.Squelch
6.CW bandwidth
7.Scan
0.Back
FUNC key
Operation
:OFF
:OFF
:+000Hz
:OFF
:Narrow
:OFF
:6dB
:+000Hz
:OFF
:Narrow
FUNC key and the
:OFF
:OFF
:+000Hz
:OFF
:Narrow
:OFF
:OFF
:+008Hz
:OFF
:Narrow
4-31