JRC JSS-2150 Instruction Manual page 167

066 PA DA high-temp
067 PA High-temp (A)
068 PA High-temp (B) *
070 PA EEPROM (PA)
EEPROM
091 PA
(PACONT)
071 PS PS for PA
017 ATU ATU lost
018 ATU High voltage
019 ATU High-temp
072 ATU Overcurrent
020 TRX DISP_KEY
021 TRX EXT_KEY
022 TRX SEL_BK
023 TRX -BK
024 TRX PLL unlock
WKR
030 PLL unlock
MODEM
WKR
031 MCDSP WDT
MODEM
WKR
032 VDSP WDT
MODEM
WKR
033 MMSI lost
MODEM
WKR
094 Memory
MODEM
035 Controller CTRL1 RBK OC
036 Controller CTRL1 PTT
037 Controller CTRL1 CW KEY
038 Controller CTRL1 EXT KEY
039 Controller CTRL2 RBK OC
040 Controller CTRL2 PTT
041 Controller CTRL2 CW KEY
042 Controller CTRL2 EXT KEY
047 Controller PA lost
048 Controller TRX lost
050 Controller MODEM lost
051 Controller CTRL1 lost
052 Controller CTRL2 lost
Detected high temperature (95°C or
more) at the radiator of the DA.
Detected high temperature (99°C or
more) at the radiator of the PA(A).
Detected high temperature (99°C or
more) at the radiator of the PA(B).
Detected the PA memory error.
Detected a memory error at the PA
CONTROL UNIT.
Detected abnormal condition (high
temp/voltage) of the PS for PA.
Detected a serial communication
error with the tuner.
Detected a high voltage (3.5 kV or
more) in antenna output.
Detected an out-of-range temperature
(70°C or more) inside the enclosure.
Detected an overcurrent
antenna.
Detected abnormal ON signal at the
PTT or Ext key of the controller.
Detected abnormal ON signal at the
transceiver external key.
Detected abnormal ON signal at
the Selcall key on the transceiver.
Detected the -BK output
during transmission.
Detected PLL unlock for the DDS
or DUC clock.
Detected PLL unlock for the DDS
clock.
Detected MCDSP malfunction.
Detected VDSP malfunction.
Detected non-registration or loss
of the ship's MMSI.
Detected a memory error.
Detected an overcurrent on the
RBK circuit of controller 1.
Detected an error on the PTT control
line of controller 1.
Detected an error on the CW key control
line of controller 1.
Detected an error on the external key
control line of controller 1.
Detected an overcurrent on the
RBK circuit of controller 2.
Detected an error on the PTT control
line of controller 2.
Detected an error on the CW key control
line of controller 2.
Detected an error on the external key
control line of controller 2.
Detected a serial communication
error with the PA.
Detected a serial communication
error with the TRX.
Detected a serial communication
error with the WKR MODEM.
Detected a serial communication
error with the No.1 controller.
Detected a serial communication
error with the No.2 controller.
Maintenance & Inspection
Stop transmission, or
reduce output.
Stop transmission, or
reduce output.
Stop transmission, or
reduce output.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Re-tune, or
output.
Stop transmission, or
reduce output.
at the Re-tune, or
output.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
error Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
reduce
reduce
6-15