JRC JSS-2150 Instruction Manual page 166

Maintenance & Inspection
050 Controller
051 Controller
052 Controller
095 Controller
096 Controller
Data
059
terminal
Data
060
terminal
Data
062
terminal
Data
063
terminal
(2) JSS-2250/2500
MI Source
Number Unit
001 PA
002 PA
003 PA
004 PA
007 PA
008 PA
010 PA
011 PA
012 PA
013 PA
014 PA
6-14
Detected a serial communication
MODEM lost
error with the WKR MODEM.
Detected a serial communication
CTRL1 lost
error with the No.1 controller.
Detected a serial communication
CTRL2 lost
error with the No.2 controller.
Detected a memory error on the
CTRL1 memory
No.1 controller.
Detected a memory error on the
CTRL2 memory
No.2 controller.
Detected a serial communication
error between controller (ID:1)
and DTE.
My/OTH DTE lost Note) My or OTH indicates the
relationship between that data
terminal
displaying this information.
Detected a serial communication
error between controller (ID:2)
and DTE.
My/OTH DTE lost Note) My or OTH indicates the
relationship between that data
terminal
displaying this information.
Detected the SPI communication
error at the USB circuit of the
data terminal connected to the
My/OTH DTE controller (ID:1).
USB-IC Note) My or OTH indicates the
relationship between that data
terminal
displaying this information.
Detected the SPI communication
error at the USB circuit of the
data terminal connected to the
My/OTH DTE controller (ID:2).
USB-IC Note) My or OTH indicates the
relationship between that data
terminal
displaying this information.
Display
Detected an overcurrent (6.8A at
Overcurrent (A)
AC, or 5.1A at DC) in the PA(A).
Detected the condition SWR > 3 in
Overload (A)
the PA(A).
Detected an overcurrent (6.8A at
Overcurrent (B) *
AC, or 5.1A at DC) in the PA(B).
Detected the condition SWR > 3 in
Overload (B) *
the PA(B).
Detected the condition SWR > 3 or
SWR/Overload
overload at the PA output.
On TX, detected high temp (99°C or
High-temp
more) at the radiator in the PA unit.
RBK overcurrent Detected RBK overcurrent.
Detected overvoltage (132V or more)
High-VDD (A)
at the drain of the FET in the PA(A).
Detected low voltage (80V or less)
Low-VDD (A)
at the drain of the PA(A) FET.
Detected overvoltage (132V or more)
High-VDD (B) *
at the drain of the FET in the PA(B).
Detected low voltage (80V or less)
Low-VDD (B) *
at the drain of the PA(B) FET.
and the controller
and the controller
and the controller
and the controller
Contents
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Check the data
terminal cable
connection, or the
condition of the data
terminal.
Check the data
terminal cable
connection, or the
condition of the data
terminal.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
(*) 500W model only
Troubleshooting
Procedure
Re-tune or operate on
another frequency.
Re-tune or operate on
another frequency.
Re-tune or operate on
another frequency.
Re-tune or operate on
another frequency.
Re-tune or operate on
another frequency.
Stop transmission, or
reduce output.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.
Please contact JRC or
our agency.