Viewing The Maintenance Information History - JRC JSS-2150 Instruction Manual

6.4.3

Viewing the maintenance information history

The following describes how to view the error information detected by the equipment or a history
of past occurring error in the 6.2 Maintenance information menu.
■ ■
Procedure
1 1 . .
1 .
Press the
MENU
menus, select 6.2 Maintenance information.
One of the screens on the right is displayed
depending on whether an error is occurring.
The displayed maintenance
Note
information is formatted as follows.
[Unit Name]: [MI Number], [Information]
2 2 . .
2 .
To check the maintenance history, press
ENT.
The popup screen at right is displayed,
select OK.
3 3 . .
3 .
The maintenance history is displayed.
Up to 100 of the latest histories are stored.
If necessary, scroll with the jog dial.
Note
The displayed maintenance history is
formatted as follows.
[Number] [Detection & recovery time] [A: Detection/V: Recovery]
[Unit name]: [MI number], [Information]
key, and through hierarchical
Maintenance & Inspection
6.2)Maintena nce information
No data
Press ENT to for Mainte history.
(If there is no error information)
6.2)Maintena nce information
ATU ：017,ATU lost
TRX ：020,DISP KEY
Press ENT to for Mainte history.
(If there are error information)
6.2)Maintena nce information
View Mai nte history?
No data
[ OK ] [Cancel]
Press ENT to for Mainte history.
Maintena nce INFO histor y
1.2020-12-31 23:59 A
ATU ：017,ATU lost
2.2020-12-30 20:10 A
TRX :0 20,DISP KEY
3.2020-06-15 18:05 V
PA :0 08,RBK overcurr ent
4.2020-06-15 15:11 A
PA :0 08,RBK overcurr ent
6-17