Table of Contents
Advertisement
13
TROUBLESHOOTING
Troubleshooting
Problems with the FreeWave Plus can
usually be traced to the following most
common causes. Perform the following
steps to diagnose and correct the
problem:
• Check that the shutter release cable
is in good condition and is properly
connected.
• Make sure that the Receiver is powered
on.
• Remove the batteries from the
Transmitter and Receiver, and change
the channel by rearranging the DIP
switches to a different combination,
taking care to ensure that both the
Transmitter and Receiver are set
identically.
FCC COMPLIANCE
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference
2. This device must accept any
interference received, including
interference that may cause undesired
operation.
Advertisement
Table of Contents
