Table of Contents
Advertisement
12
WIRED RELEASE TRIGGER
You can use the FreeWave Plus receiver as
a wired trigger and it can be used with the
receiver's power turned off.
1. Adjust your camera settings, such as
exposure mode, shutter speed, and
focus and shooting modes.
2. Press the receiver's shutter release
button halfway to focus.
Note: Autofocus is not compatible with
back-button focusing on some camera
models.
3. Press the shutter release button fully
to take a photo. If your camera is
set to bulb mode you need to press
the shutter a second time to end the
exposures.
Advertisement
Table of Contents
