Table of Contents
Advertisement
6
POWERING ON & OFF
Turn ON the Receiver: Press and hold
the Power button for 2 seconds. The
LEDs will flash red at 2 second intervals to
indicate that the receiver is working.
To power down after use, Press and hold the
Power button for 2 seconds. The LEDs will
flash 4 times in quick succession to indicate
that it is powering off.
There is no need for a power button
on the transmitter. The Transmitter
is always ready to fire and uses power
only when you press the focus/shutter
release button.
Press and hold the
Power button for 2 seconds
to power up the Receiver.
Advertisement
Table of Contents
