Specifications - Evinrude E-TEC G2 Manual

Product Information
Displacement
Engine Type
Full Throttle Operating
Range
(1)
Power
Idle RPM in Neutral
(2)
Ignition Timing
Emission Control System:
(2)
per SAE J1930
Fuel Requirements
Oil – Lubricant
– Capacity
Warning Signals
(3)
Battery, Minimum
(2)
Spark Plug
Fuses
Fuel Filter
Battery Charging
Gearcase – Lubricant
–
Capacity
Power Trim/Tilt – Fluid
Capacity
Propeller
Weight
Sound at Drivers Ear
(LpA) ICOMIA 39.94
Transom Height
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
(2) Emission Control Information.
(3) Use a 800 CCA (1000 MCA) battery when operating in temperatures below 32°F (0°C).
(4) Use Evinrude HPF Pro Gearcase Lubricant for high performance outboards and commercial
applications. Evinrude HPF Pro Gearcase Lubricant delivers exceptional durability and reliability and
promotes long gearcase life in marine use.
72

Specifications

15 HO, 25, 30 Models
35.1 cu. in. (576 cc)
In-line, 2 Cylinder, Two-Cycle, E-TEC
15 HP (HO) – 5000 to 5500 RPM
25, 30 HP – 5500 to 6000 RPM
15 HP (HO) – 15 HP (11.0 kw) @ 5500 RPM
25 HP – 25 HP (18.4 kw) @ 5500 RPM
30 HP – 30 HP (22.1 kw) @ 5500 RPM
(2)
750 ± 50
Not Adjustable
ECM, E-TEC (Engine Control Module, E-TEC)
(2)
87 Pump Posted AKI (90 RON)
Fuel Requirements
– Refer to
TC-W3 NMMA-certified oil or Evinrude XD100 oil
2– Stroke Engine Oil Requirements
– Refer to
1.5 qt. (1.4 l)
Controlled by the outboard's EMM
640 CCA (800 MCA) 12 volt or
800 CCA (1000 MCA) 12 volt below 32°F (0°C)
Refer to Parts Catalog or engine ECI Label
P/N 967545 – Refer to
In-line Replaceable
15-Amp, Fully Regulated
(4)
Evinrude HPF Pro
11 fl. oz. (325 ml)
11.7 fl. oz. (345 ml)
Propeller Selection
Refer to
DR / DRL Models 150 /154 lbs. (68 / 70 Kg),
DEL / DTE / DTEL Models 160 / 162 /166 lbs. (73 / 74 / 75 Kg),
DPL / DHPL / HPSL Models 181 lbs. (82 Kg),
DTL / DHTL / HTSL / HPSX Models 187 lbs. (85 Kg),
HTSX Models 193 lbs. (88 Kg)
76.8 dB(A)
DR / DTE Models – 14.5 to 15 in (368 to 381 mm)
DRL / DTEL / DPL / DTL / DHTL / DHPL / HTSL / HPSL Models –
19.5 to 20 in (495 to 508 mm)
HTSX / HPSX Models – 24.5 to 25 in (622 to 635 mm)
on page 20
Fuse
on page 56
on page 70
on page 18