Table of Contents
Advertisement
Battery Installation and Removal
Always start with a fully charged battery.
Do not splash or immerse battery or
charger in water. See battery and charger
information shipped with the FieldLazer.
Replace and charge battery only in a
well-ventilated area and away from
flammable or combustible materials,
including paints and solvents.
Remove and install battery into the
FieldLazer as follows:
1.
Open battery cover and remove the
used battery, if in place.
3A9002A
Battery Installation and Removal
2.
Install battery by aligning the battery
pack with the rails inside the FieldLazer
and sliding it in until the battery pack is
firmly seated. Ensure that it does not
disengage. Close battery cover.
NOTICE
DO NOT operate unit with battery cover
open as overspray and water could damage
the battery.
11
Advertisement
Table of Contents
