Advertisement
Model W73ER, Wood Frame
Installation
D. Assemble track.
1.
Slide track components into track.
(Figure 5)
NOTE:
• All track components must be placed in track
• Insert slider into track first.
• Stop block (or optional hold open) should be
• The longer end of slider should be pointed
E. Install track to door.
1.
Make sure slider and track components
are installed prior to installing track to
OR
door. See Step C.
2.
Install track into top of door using
either four (4) 1/4-20 x 7/16" machine
screws for metal doors or four (4)
#14 x 1-1/4" wood screws for wood
doors. (Figure 6).
NOTE: If necessary, use optional
retrofit spacer (replacement
application only, consult factory).
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
ISW73ER Rev 1 10/21
before installing track into door.
last component at hinge side of door.
towards hinge side of door.
Approved 2021-10-20
Optional Hold Open Track Components
Figure 5
Hinge
Side
Figure 6
Non Hold Open Track Components
Slider
Slider
1/4-20 x 7/16 FHPMS (4 each)
or 14 x 1-1/4 FHPWS (4 each)
Optional
Retrofit Track
Spacer
5
Advertisement
