Assa Abloy RIXSON W73ER Installation Instructions Manual

Model W73ER Overhead Concealed Closer
With Emergency Release Hinge
Non-Hold Open and Hold Open
Wood Frame Installation Instructions
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
Model W73ER, Emergency Release Hinge Hung
Components
(Supplied fasteners shown on page 3)
Arm
70218- (finish)
Cover Plate
70202- (finish)
Wood Mounting
Clip (90256)
Tools Needed
Phillips
Screwdriver
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
ISW73ER Rev 1 10/21
Closer Body
73 LAP
5/16" 3/8"
Flathead
Screwdriver Hex Wrenches
Approved 2021-10-20
These instructions utilize Markar and Pemko Anti-Barricade
Rescue Hardware, supplied separately, to illustrate an emergency
release hinge installation. For other manufacturers' hinge and/or
stop products, please consult Rixson Support for templating and
installation modifications.
READ AND FOLLOW ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Wood Mounting Clip
(90267)
Wood
Mounting
Clip (90268)
Optional Hold Open Slider Centering
Assembly (90254) Hub (70219)
AND
1/4-20 3/16"
#7
for Metal for Wood
Drill
Track
(90239)
Retrofit Track Spacer and
Screws, Optional (90260)
Not for new installation. Replacement
only. Consult factory.
Slider Non Hold Open
(90253) Stop Block
(90255)
Framing
Square
Tape
Measure
Pencil