Return To Supplier; Storage - Danfoss APP 5.1 User Manual

User manual
10
Installation, Operation and Maintenance APP Pumps (APP 5.1-10.2)
See below examples of where to/not to attach
the lifting slings on the pump unit:
Correct lifting with 2 separate slings:
Wrong lifting:
When lifting the pump unit, one sling must be
attached to the electric motor and one sling
around the pump .
Only some motors and pumps have specific
lifting eyes .
Do not use connections/nozzles for lifting!
Do not use only one sling!
Make sure that the unit/load is balanced before
attempting to lift, as the centre of the mass is
different from pump to pump and pump unit to
pump unit .
How to mount the pump and the electric motor
correctly together, see Data sheet in appendix 1
or APP pump instruction in appendix 2 .
180R9263 / IOM APP Pumps - v01 / 01.2013
Incorrect lifting can result in personally injury
and/or damage to the pump unit.

4.5 Return to supplier

Please see maintenance chapter 7 .

4.6 Storage

Each pump is tested before shipment and
therefore holds water, so for storage tempera-
ture and frost protection see Data sheet in
appendix 1 or APP pump instruction in appendix
2 .
The pumps are NOT delivered frost protected
from the factory.