Led Indicators For System Status/系统指示灯/系統指示燈 - Advantech ACP-2010 User Manual


電源開關：按下此按鈕可接通或關閉系統電源。
 警報重置按鈕：系統發生故障時 ( 如風扇故障或是機箱內溫度過高等 ), 聲音警
報將啟動。按下此按鈕可停止警報聲
 系統重置按鈕：按下此按鈕可重啟系統

雙 USB 接頭：用以連接多種 USB 設備 , 進行數據傳輸 , 備份或輸入

PS/2 接頭：用以連接鍵盤或滑鼠 , 取決於主機板設計
3.1.2 LED Indicators for System Status/ 系统指示灯 / 系統指示燈
Four LEDs are placed on the left side of the front panel to indicate system health and
activity. Refer to Table 3.1 for an LED definition summary.
机箱前面板左侧配有 4 个 LED 指示灯，能够显示系统是否正常运行及运行状态。LED
指示灯的功能描述请参考表 3.1。
機箱前面板左側有四個 LED 指示燈 , 能夠顯示系統運行狀態 . LED 指示燈的功能描述
請參考表 3.1。
Table 3.1: LED indicator functions/LED 指示灯功能 /LED 指示燈功能
LED
When the system power is on, the power LED is Green.
If the fan LED is RED, it indicates a failed cooling fan, the alarm will also be activated.
To stop the alarm, press the Alarm Reset button and then replace the failed fan with
a working one immediately.
If the temperature LED is RED, it means that inside of the chassis is overheated
(more than 50
beeping, press the Alarm Reset button. Inspect the fan filter and the rear section of
the chassis immediately. Make sure the airflow inside the chassis is smooth and not
blocked by dust or other particles.
Description
说明
說明
System Power
系统电源
系統電源
Hard disk drive activity
硬盘状态
硬碟狀態
Temperature in the chas-
sis
机箱内温度
機箱內溫度
Cooling fan status
冷却风扇状态
冷卻風扇狀態
C/122 ). An audio alarm will be activated. To stop the alarm from
° °F
Green Orange
绿灯 橙色
綠燈 橘色
Normal
N/A
正常
Data access
N/A 数据访问
傳輸資料
Normal
N/A
正常
Normal
N/A
正常
21 ACP-2010/2320 (3-in-1) User Manual
Red
红灯
紅燈
Abnormal
异常
異常
N/A
Abnormal
异常
異常
Abnormal
异常
異常