f
Label — a label on the top panel identifies the unit as the
transmitter (Tx, left panel of the figure below) or receiver (Rx,
right panel of the figure below) and also identifies the fiber optic
port numbers and the power input.
Extron
33-1641-01
Rev. A 05 08
TO COMPUTER (Tx)
PN 60-977-12
5 V
1
Bottom panel features
The bottom panels of both the transmitter and receiver have
a label that identifies the unit's serial number. There is also a
second power LED that mirrors the signals given by the LED on
the top panel.
Side panel features (transmitter only)
g
EDID Minder storage button (transmitter only) — A recessed
switch activates the transmitter to capture and store EDID
information from the display device. This allows the source
device to provide a signal with a resolution and refresh
rate matching the needs of the display device. (For more
information, see the next section, "Setup and Operation".)
2
3
4
7
DVI 104 Tx/Rx • User's Guide
Extron
33-1642-01
Rev. A 05 08
TO DISPLAY (Rx)
PN 60-977-13
5 V
4
3
2
1
5