Extron electronics Fiber Optic DVI Extenders DVI 104 RX User Manual page 13

• Ensure that the transmitter is firmly plugged into the
source device and the receiver is firmly plugged into the
output device.
• Try resetting the system by unplugging and reconnecting
the DVI connectors or the power jacks.
• Try rebooting the computer.
Screen is distorted or displays noise
• Ensure that the cable length does not exceed
• Ensure
and are terminated with securely fitting plugs.
• Ensure that the graphic resolution is correctly set (see
"Setup and Operation").
• View the "Display Properties" of the source device to check
the output resolution. The resolution and refresh rate must
match the capabilities of the display device and must not
exceed 1920 x 1200 at 60 Hz.
• Try resetting the system by unplugging and reconnecting
the DVI connectors or the power jacks.
that the cables are high quality multimode cable
DVI 104 Tx/Rx • User's Guide
1,640' (500 m).
9