3
Check that the following screen
is displayed when the device is
found.
If the device has been connected
to the system before, this screen
may not be displayed and the
®
Miracast
connection may start
immediately.
4
Select the system name on the
smartphone.
5
Select "Yes".
6
Check that Miracast
screen is displayed.
Depending on the device con-
nected, it may take approxi-
mately 5 to 15 seconds before
®
the Miracast
operation screen
is displayed.
●
The signal strength/status of the
®
Wi-Fi
connection (P2P mode) is dis-
played on the upper right side of the
screen. (P.11)
●
To check the Miracast
Wi-Fi
●
Miracast
the Wi-Fi
mode).
®
operation
3-3. Media operation
®
setting on the
®
setting screen (P.38)
®
will not be available when
®
connection is in use (P2P
73
3