Suzuki ACROSS Owner's Manual page 128

3
Select "Update contact".
4
Select the desired contact.
5
Select a phone type for the
phone number.
*
: For PBAP compatible Bluetooth
phones, this function is available
when "Automatic transfer" is set to
off. (P.126)
Transferring contacts from
device
●
When an Android Auto connection is
established, this function will be
*
unavailable.
*
: This function is not made available in
some countries or areas.
From phone (OPP compatible
®
Bluetooth phones only)
1
Select "Transfer contacts from
device".
2
Select "From phone
(Bluetooth)".
When the contact is not regis-

tered
3
Transfer the contact data to the
system using a Bluetooth
phone.
 This operation may be unneces-
sary depending on the type of
cellular phone.
 To cancel this function, select
"Cancel".
4
Check that a confirmation
screen is displayed when the
operation is complete.
When the contact is registered

3
Select "Replace contacts" or
®
"Add contact".
"Replace contacts": Select to transfer
the contact from the connected cellular
phone and replace the current one.
"Add contact": Select to transfer the
desired contact data from the con-
nected cellular phone to add to the cur-
rent one.
4
Transfer the contact data to the
system using a Bluetooth
phone.
 This operation may be unneces-
sary depending on the type of
cellular phone.
 To cancel this function, select
"Cancel".
5
Check that a confirmation
screen is displayed when the
operation is complete.
From USB device
Backed-up contact data ("vCard"
formatted) can be transferred from
®
USB device or Bluetooth
connected via USB to this system.
1
Open the lid and connect a USB
device. (P.54)
2
Select "Transfer contacts from
device".
3
Select "From USB".
127
6-2. Setup
®
®
phone
6