128
6-2. Setup
4
Select "USB 1" or "USB 2" when
the multiple USB devices are
connected.
If a USB device is connected,
skip this procedure.
When the contact is not regis-
tered
5
Select a desired file from vCard
file list.
6
Check that a confirmation
screen is displayed when the
operation is complete.
When the contact is registered
5
Select "Replace contacts" or
"Add contact".
"Replace contacts": Select to trans-
fer the contact from the connected
USB device or Bluetooth
and replace the current one.
"Add contact": Select to transfer the
desired contact data from the con-
nected USB device or Bluetooth
phone to add to the current one.
6
Select a desired file from vCard
file list.
7
Check that a confirmation
screen is displayed when the
operation is complete.
●
Depending type of phone used and
number of files, it may take time to
display vCard file lists and download
contacts.
●
Downloading may not complete cor-
rectly in the following cases:
• If the power switch is turned off during
downloading.
• If the USB device or Bluetooth
phone is removed before downloading
is complete.
Registering a new contact to
the contact list
New contact data can be regis-
tered.
Up to 4 numbers per person can be
registered. For PBAP compatible
Bluetooth
available when "Automatic transfer"
is set to off. (P.126)
1
Select "New contact".
2
Enter the name and select "OK".
3
Enter the phone number and
select "OK".
4
Select the phone type for the
®
phone number.
phone
5
To add another number to this
contact, select "Yes".
■
Registering a new contact in a
®
different way (from the call
history screen)
1
Display the phone top screen.
(P.108)
2
Select "History" and select a
contact not yet registered in the
contact list.
3
Select "Add to contacts".
4
Follow the steps in "Registering
a new contact to the contact list"
from step 2. (P.128)
Editing the contact data
®
For PBAP compatible Bluetooth
®
phones, this function is
®