Receiving A Call Using The Bluetooth Hands- Free System; Talking On The Bluetooth ® Hands-Free System; Talking On The Bluetooth Hands-Free System - Suzuki ACROSS Owner's Manual

116
6-1. Phone operation (Hands-free system for cellular phones)
Receiving a call using
the Bluetooth
free system
When a call is received, the fol-
lowing screen is displayed
with a sound.
Incoming calls
1
Select "Answer" or press the
switch on the steering wheel to
talk on the phone.
"Decline": Select to refuse to receive
the call.
To adjust the volume of a received call:
Turn the "POWER VOLUME" knob, or
use the volume control switch on the
steering wheel.
●
During international phone calls, the
other party's name or number may not
be displayed correctly depending on
the type of cellular phone you have.
●
The incoming call display mode can
be set. (P.124)
●
The ringtone that has been set in the
sound settings screen can be heard
when there is an incoming call.
Depending on the type of Bluetooth
phone, both the system and
®
Bluetooth phone may ring simultane-
ously when there is an incoming call.
(P.123)
Talking on the
®
hands- Bluetooth
system
While talking on the phone, the
following screen is displayed.
The operations outlined below
can be performed on this
screen.
Call screen operation
A
B
C
D
E
®
F
®
hands-free
Select to display the keypad to
send tones. (P.117)
Select to send tones. This but-
ton only appears when a num-
ber that contains a (w) is dialed
in hands-free mode. (P.117)
Select to adjust your voice vol-
ume that the other party hears
from their speaker. (P.117)
Select to mute your voice to the
other party.
Select to change handset
modes between hands-free and
cellular phone.
Select to put a call on hold. To
cancel this function, select "Acti-