Suzuki ACROSS Owner's Manual page 33

32
2-2. Connectivity settings
4
Select the desired connection.
"Device info": Select to confirm and
change the Bluetooth
mation. (P.33)
When another Bluetooth

is connected
 To disconnect the Bluetooth
device, select "Yes".
5
Check that a confirmation
screen is displayed when the
connection is complete.
 If an error message is displayed,
follow the guidance on the
screen to try again.
●
It may take time if the device connec-
tion is carried out during Bluetooth
audio playback.
●
Depending on the type of Bluetooth
device being connected, it may be
necessary to perform additional steps
on the device.
●
When disconnecting a Bluetooth
device, it is recommended to discon-
nect using this system.
Connecting a Bluetooth
device in a different way
(from phone top screen)
P.110
P.123
®
device infor-
P.70
■ Auto connection mode
®
device
To turn auto connection mode on,
set "Bluetooth power" to on.
®
(P.35) Leave the Bluetooth
device in a location where the con-
nection can be established.
 When the power switch is turned
to ACC or ON, the system
searches for a nearby registered
device.
 The system will connect with the
registered device that was last
® connected, if it is nearby. When
automatic connection priority is
® set to on and there is more than
one registered Bluetooth
available, the system will auto-
matically connect to the
®
Bluetooth
est priority. (P.35)
■ Connecting manually
®
When the auto connection has
failed or "Bluetooth power" is turned
off, it is necessary to connect the
Bluetooth
Connecting a Bluetooth
device in a different way
(from phone setup screen)
Connecting a Bluetooth
device in a different way
®
(from Bluetooth audio
screen)
®
phone with the high-
®
device manually.
®
®
®
®
phone