6-1. Phone operation (Hands-free system for cellular phones)
a sending message screen is
displayed.
8
Check that a confirmation
screen is displayed when the
operation is complete.
If an error message is displayed,
follow the guidance on the
screen to try again.
●
The short messages can contain up to
160 characters. The divided text will
be sent when the message body
exceed over 160 characters.
●
Depending on the type of Bluetooth
phone used for receiving messages,
reply function may not be used.
Replying to a message
(quick reply)
15 messages have already been
stored.
1
Display the message screen.
(P.118)
2
Select a desired account name
that is displayed on the left side
of screen.
3
Select the desired message
from the list.
4
Select "Reply".
5
Select "Quick message".
6
Select the desired message.
: Select to edit the message.
(P.121)
7
Select "Send".
"Cancel": Select to cancel sending the
message.
While the message is being sent,
a sending message screen is
displayed.
8
Check that a confirmation
screen is displayed when the
operation is complete.
If an error message is displayed,
follow the guidance on the
screen to try again.
●
Depending on the type of Bluetooth
phone, reply function is not available.
■
Editing quick reply messages
®
This operation cannot be performed
while driving.
1
Select "Reply".
2
Select "Quick message".
3
Select
corresponding to the
desired message to edit.
4
Select "OK" when editing is
completed.
●
To reset the edit quick reply mes-
sages, select "Default".
Calling the message sender
Calls can be made to an e-
mail/SMS/MMS message sender's
phone number.
This operation can be performed
while driving.
■
Calling from e-mail/SMS/MMS
message display
1
Display the message screen.
(P.118)
121
®
6