Suzuki ACROSS Owner's Manual page 118

6-1. Phone operation (Hands-free system for cellular phones)
vate".
G Select to hang up the phone.
●
When cellular phone call is changed
to hands-free call, the hands-free
screen will be displayed and its func-
tions can be operated on the screen.
●
Changing between cellular phone call
and hands-free call can be performed
by operating the cellular phone
directly.
●
Transferring methods and operations
will be different depending on the type
of cellular phone you have.
●
For the operation of the cellular
phone, see the manual that comes
with it.
Sending tones
■ By keypad
1
Select "0-9".
2
Enter the desired number.
■ By selecting "Release tones"
"Release tones" appear when a
continuous tone signal(s) contain-
ing a (w) is registered in the contact
list.
This operation can be performed
while driving.
1
Select "Release tones".
●
A continuous tone signal is a charac-
ter string that consists of numbers and
the characters "p" or "w". (e.g.
056133w0123p#1)
●
When the "p" pause tone is used, the
tone data up until the next pause tone
will be automatically sent after 2 sec-
onds have elapsed. When the "w"
pause tone is used, the tone data up
until the next pause tone will be auto-
matically sent after a user operation is
performed.
●
Release tones can be used when
automated operation of a phone
based service such as an answering
machine or bank phone service is
desired. A phone number with contin-
uous tone signals can be registered in
the contact list.
Transmit volume setting
1
Select "Transmit volume".
2
Select the desired level for the
transmit volume.
3
Press the button to display
previous screen.
●
The sound quality of the voice heard
from the other party's speaker may be
negatively impacted.
●
"Transmit volume" is dimmed when
mute is on.
Switching calls while a call
is in progress
 When there are no calls on hold
during a call: "Hold" is displayed.
When selected, the current call is
placed on hold.
 When there is no current call, but
there is a call on hold: "Activate"
is displayed. When selected, the
system switches to the call that
was on hold.
 When there is another call on
hold during a call: "Swap calls" is
displayed. When selected, the
current call is placed on hold,
and the system switches to the
call that was on hold.
117
6