INSTALLATION
Wall mounting
If you would like the soundbar to be wall mounted, follows the steps below.
1. Align the soundbar against the wall where you would like to mount the soundbar on.
There are two sets of screws located at the back of the soundbar. Ensure there is at
least a 10cm clearance between the TV and soundbar.
2. Mark the vertical midpoint of each screw set on the wall. This distance between the
markings should be approximately 406.7mm. Remove the soundbar and using a drill
(not supplied), drill holes on the two markings.
3. Using a Phillips screwdriver (not supplied), loosen the screws on the soundbar. Secure
the provided brackets with the two loosened screws each.