Kogan KASB130DDWSA User Manual page 12

AUX in mode
• Using the included RCA cable, connect one end of the cable into your device.
Connect the other end into the AUX input of the soundbar.
• Press the power button on the soundbar or the mode/mute button on the remote
control until the LED indicator illuminates yellow.
• To prevent sudden loudness, adjust the volume on your device to low then begin
playing. Adjust the volume and audio settings using the remote control as desired.
Optical mode
• Press the power button on the soundbar or the mode/mute button on the remote
control until the LED indicator illuminates purple.
• Connect one end of an optical cable (not included) to your device (for example, TV,
gaming console, DVD player). Connect the other end into the optical input on the
soundbar.
• Enter the settings on your device and set the audio/digital output to be "PCM" or
"Dolby".
• Sound from your device will now be emitted through the soundbar. Use the remote
control to make any audio adjustments.
USB mode
• Insert a USB into the USB port of the soundbar.
• Press the power button on the soundbar or the mode/mute button on the remote
control until the LED indicator illuminates white.
• Press the Play/Pause button to play and pause music.
• Press the Previous or Next button to play previous or skip songs.
Powering off
Press and hold the power button on the soundbar or remote control to turn the soundbar
off.
Remote control battery replacement
This remote control is powered with x1 AAA battery (not included). To replace the battery:
• Slide the back cover and remove the old battery.
• Noting the polarity markings '(+/–)', insert a new battery into the remote control.
• Slide the back cover onto the remote control.