Kogan KASB130DDWSA User Manual page 11

• Select "KASB130DDWSA" from the Bluetooth device list and tap to connect.
Note:
If the device asks for a password, enter "0000" and press confirm to pair the device
with the soundbar.
• Once paired, the LED indicator will illuminate a solid blue. Music can now be played
from your device with its sound emitting from the soundbar. Ensure to keep the audio
device away from obstructions and within 10 metres of the soundbar to maintain a
stable connection.
• To disconnect the audio device, press the Bluetooth button on the soundbar. The
soundbar will remain available for connection to other Bluetooth audio devices until it
is turned off or another connection mode is selected.
HDMI (ARC) mode
This soundbar supports HDMI with an audio return channel (ARC). Many standard HDMI
ports support ARC but if unsure, check with the TV's manufacturer. This allows the sound
from a TV to emit through the soundbar rather than the TV's inbuilt speakers.
• Press the power button on the soundbar or mode/mute button on the remote control
until the LED indicator illuminates light blue.
• Connect one end of an HDMI cable (not included) into the HDMI (ARC) input on the
soundbar. Connect the other end into the HDMI (ARC) port of your TV.
• Enter the settings of the TV and set the audio/digital output to be "PCM" or "Dolby".
• The TV's sound will now emit from the soundbar. Use the remote control to make any
desired audio adjustments.
Line in mode
• Connect one end of a 3.5mm audio cable (not included) into your device. Connect
the other end into the line input on the soundbar.
• Press the power button on the soundbar or mode/mute button on the remote control
until the LED indicator illuminates green.
• To prevent sudden loudness, adjust the volume on your device to low then begin
playing. Adjust the volume and audio settings using the remote control as desired.