Description; Area Of Application - Siemens SIMOTICS DP Operating Instructions Manual

Description

3.1

Area of application

Risk of explosion
This machine is not designed for use in hazardous areas. An explosion can occur if the machine
is operated in these areas. This can result in death, serious injury or material damage.
• Never operate this machine in hazardous areas.
The rotating electrical motors of this series are used as industrial drives. These permanent-
magnet synchronous motors have been designed to address a wide range of drive applications.
They are characterized by their high power density, ruggedness, long lifetime and outstanding
reliability.
Correct and intended use of the machines
These machines are intended for industrial installations. They comply with the harmonized
standards of the series EN / IEC 60034 (VDE 0530). It is prohibited to use these motors in
hazardous zones if the marking on the motor rating plate does not explicitly permit line or
converter operation. If other/more wide-ranging demands (e.g. protection so that they cannot
be touched by children) are made in special cases – i.e. use in non-industrial installations – these
conditions must be ensured by the customer.
Note
Machine directive
Low-voltage motors are components designed for installation in machines in accordance with
the current Machinery Directive. Commissioning is prohibited until it has been absolutely
identified that the end product is in conformance with this Directive. Comply with standard EN /
IEC 60204-1.
Using machines without CE marking
Machines without CE marking are intended for operation outside the European Economic Area
(EEA). Do not use any machines without a CE marking in the EEA!
Using machines without UKCA marking
Do not use any machines without UKCA marking in Great Britain (England, Wales and Scotland).
1FZ shaft height 280
Operating Instructions, 02/2022, A5E51698698A
WARNING
3
19