Siemens SIMOTICS DP Operating Instructions Manual page 129

Sort the components for recycling according to whether they are:
• Iron and steel
• Aluminum
• Non-ferrous metal, e.g. windings
The winding insulation is incinerated during copper recycling.
• Insulating materials
• Cables and wires
• Electronic waste
Process materials and chemicals
Sort the process materials and chemicals for recycling according to whether they are for
example:
• Oil
• Grease
• Cleaning substances and solvents
• Paint residues
• Anti-corrosion agent
• Coolant additives such as inhibitors, antifreeze or biocides
Dispose of the separated components according to local regulations or via a specialist disposal
company. The same applies for cloths and cleaning substances which have been used while
working on the machine.
Packaging material
• If necessary, contact a suitable specialist disposal company.
• Wooden packaging for sea transport consists of impregnated wood. Observe the local
regulations.
• The foil used for water-proof packaging is an aluminum composite foil. It can be recycled
thermally. Dirty foil must be disposed of via waste incineration.
1FZ shaft height 280
Operating Instructions, 02/2022, A5E51698698A
Disposal
11.7 Disposal of components
127