Replacing The Paper In The Printer; Periodical Checks; Periodical Safety Checks - TEXA KONFORT 700R Technical Manual

14.1.4 Replacing the Paper in the Printer

Follow the instructions provided in the chapter Replacing the Paper in the
Printer.

14.2 Periodical Checks

In order to guarantee a correct operation of the device we recommend you
check the parts that are the most subject to wear on a regular basis.
Parts subject to
wear
Service hoses
Quick fittings
Oil and UV
bottles
Wheels
Power supply
cable

14.3 Periodical Safety Checks

In order to guarantee the correct operation of the device, carry out periodical
checks on the safety devices.
The safety valve and safety pressure switch must be visually checked to verify
that they are not damaged in order to guarantee that they are working properly.
A periodic inspection of the operation of the safety devices (Safety
Pressure Switch and Safety Valve) and of the integrity of the
refrigerant liquid receiver must be carried out at intervals defined
by the national regulations in force in the country in which the
equipment is being used.
Check
Make sure there are no cuts, scratches or bulges.
Make sure there are no signs of wear and that the hoses do
not harden during use.
Make sure the service hoses are connected properly.
Make sure there are no cuts or scratches on the O-rings.
Make sure they are clear and not damaged.
Make sure the brakes are working properly.
Make sure there are no cuts, scratches or burns.
en
69