Standard Bottles; How To Fill The Internal Tank; Language Setup - TEXA KONFORT 700R Technical Manual

9.7.2 Standard Bottles

To fill a standard bottle proceed as follows:
2. Remove the desired bottle, slightly pulling back on the ferrule on the
pneumatic fitting.
2. Screw the tank cap off.
3. Fill the bottle with the oil/UV tracer.
4. Screw the tank cap on.
5. Reinsert the bottle by slightly pulling back the ferrule on the pneumatic fitting.

9.8 How to Fill the Internal Tank

Internal tank in the device is empty upon delivery.
You must carefully read and understand this Operating Manual in
order to perform the provided instructions correctly.
Proceed as follows:
1. Turn on the device.
2. Launch the software function for the internal tank filling by selecting the option
ADDITIONAL FUNCTIONS.
If you are working with the 780R charging station, make sure to
select the specific filling function for the gas you intend to refill.
3. Follow the instructions on the display.

9.9 Language Setup

The software within the device can be viewed in different languages.
The languages available are stored within the SD CARD.
Italian is the default language.
You must set the software's display language.
This operation must be carried out when the equipment is started for the
first time.
You may change the language selected at any time by following the instructions
provided in this chapter.
The following procedure uses as examples screens displayed by the charging
stations that are equipped with a TFT colour display.
en
53