Installation - TEXA KONFORT 700R Technical Manual

8 INSTALLATION

This chapter describes the procedures required in order to install the device
properly.
The installation must be performed by qualified personnel only,
carefully following the instructions provided in this manual.
The device is provided with the following:
• GAS KIT *:
• Connections for the quick fittings specific for the version purchased (R134a or
R1234yf refrigerant)
• Fastening screws for the fittings
• Stickers that identify the fittings
• Tag indicating the type of refrigerant used
• Pressure clip used to fasten the tag
• Technical Manual: contains the description of the device, user instructions to
guarantee a correct use and correct maintenance.
• CD Documentation: contains the technical and operating manual (user
instructions for the device)
• SD CARD
• SD CARD READER
• Power supply cable
• Protective cover for the device
• TANK FILLING KIT:
• Recharging cylinder hose adapter
• Paper gasket for recharging cylinder hose adapter
• Copper gasket for HP recharging cylinder hose adapter
(*) Not required for the charging stations:
• 705R
• 705R OFF ROAD
• 707R
• 710R
• 710L
• 780R BI-GAS
46